Replacing Tezro PSU - Printable Version

+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: SGI/MIPS (//forums.irixnet.org/forum-3.html)
+--- Forum: Hardware/Triage/Repair (//forums.irixnet.org/forum-11.html)
+--- Thread: Replacing Tezro PSU (/thread-1842.html)

---

Replacing Tezro PSU - Raion - 01-29-2020

Replacing my Tezro's PSU was easier than I anticipated, the basic procedure is:

1. Unplug the 4-pin molex connectors. 
2. Undo all 4 Torx 15 screws, and slide the PSU towards the front of the case until loose. I set mine on top of the VPro card cage while I did the next steps.
3. Unplug the 5-pin, ATX connector and 10-pin custom connector. 

I recently bought a NOS version from Israel for under $100. I'm going to have my original cleaned and refurbished by a gentleman in WA soon.

---