Feet for SGI Indy - Printable Version
+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: SGI/MIPS (//forums.irixnet.org/forum-3.html)
+--- Forum: Hardware/Triage/Repair (//forums.irixnet.org/forum-11.html)
+--- Thread: Feet for SGI Indy (/thread-1816.html)
+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: SGI/MIPS (//forums.irixnet.org/forum-3.html)
+--- Forum: Hardware/Triage/Repair (//forums.irixnet.org/forum-11.html)
+--- Thread: Feet for SGI Indy (/thread-1816.html)
Feet for SGI Indy - Raion - 01-17-2020
I have found that common 13mm/.5in bumpers sold at Walmart work great side by side to replace Indy feet.
![[Image: ICIbfL2.jpg]](https://i.imgur.com/ICIbfL2.jpg)
RE: Feet for SGI Indy - jan-jaap - 01-17-2020
(01-17-2020, 01:24 AM)Raion Wrote: I have found that common 13mm/.5in bumpers sold at Walmart work great side by side to replace Indy feet.
Original turned 'snotty'? I have an Indy with the same problem, and the feet of the 'slab' keyboards suffer from it too.
RE: Feet for SGI Indy - dexter1 - 01-17-2020
Because of the tendency of the rubber feet becoming squishy, particularly at the PSU underside, i replace them with thick leather cut to size and fix them with some double-adhesive tape. The leather will endure the warmth just fine
RE: Feet for SGI Indy - Raion - 01-18-2020
Yeah, the rubber degrades and becomes more like glue.