IRIX Network Forums
Hexen II up and running natively in IRIX! - Printable Version

+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: SGI/MIPS (//forums.irixnet.org/forum-3.html)
+--- Forum: IRIX/Software (//forums.irixnet.org/forum-7.html)
+--- Thread: Hexen II up and running natively in IRIX! (/thread-1123.html)

Pages: 1 2


Hexen II up and running natively in IRIX! - Irinikus - 04-13-2019

I've got Hexen II up and running on my Octane!

It runs very well in a full screen mode of 1280x1024!

I've just taken a picture of it running in a windowed mode, to show IRIX in the background.

Ive also got it up and running in SoftWindows95, but it runs extremely slowly and without OpenGL.

[Image: fFqD3tY.jpg]


RE: Hexen II up and running natively in IRIX! - praetor - 04-13-2019

Ohh! Nice! How'd you pull that off?


RE: Hexen II up and running natively in IRIX! - Irinikus - 04-13-2019

(04-13-2019, 10:43 PM)praetor Wrote:  Ohh! Nice! How'd you pull that off?

The IRIX install file's in Nekoware Beta.

I downloaded the Hexen II demo and installed it in SoftWindows95 and then copied the installed folder over to IRIX.

I then copied the Hexen II folder into the games folder in nekoware and then copied the h2launcher and GLhexen2 files from the bin folder into the hexen II folder in games.

You need to run GLhexen2 first, which doesn't work and then only can you use the h2launther to launch the game, this is a necessary step.

Thanks to eudatux23, I now have the full version with expansions up and running!


RE: Hexen II up and running natively in IRIX! - gijoe77 - 04-14-2019

(04-13-2019, 11:03 PM)Irinikus Wrote:  
(04-13-2019, 10:43 PM)praetor Wrote:  Ohh! Nice! How'd you pull that off?

The IRIX install file's in Nekoware Beta.

I downloaded the Hexen II demo and installed it in SoftWindows95 and then copied the installed folder over to IRIX.

I then copied the Hexen II folder into the games folder in nekoware and then copied the h2launcher and GLhexen2 files from the bin folder into the hexen II folder in games.

You need to run GLhexen2 first, which doesn't work and then only can you use the h2launther to launch the game, this is a necessary step.

Thanks to eudatux23, I now have the full version with expansions up and running!

can you tar that up and post it ? Smile


RE: Hexen II up and running natively in IRIX! - Irinikus - 04-14-2019

I've tarred up the Hexen2 directory, which you can untar on your SGI and copy to the games folder within the nekoware folder. You will need to install "neko_uhexen2-1.5.4.tardist" and copy "h2launcher and glhexen2" to the ween folder.

[Image: MsiFsFh.jpg]

Where do you want me to post it to? (As you can see, it's quite a large file.)


RE: Hexen II up and running natively in IRIX! - eudatux23 - 04-14-2019

(04-14-2019, 01:30 AM)gijoe77 Wrote:  
(04-13-2019, 11:03 PM)Irinikus Wrote:  
(04-13-2019, 10:43 PM)praetor Wrote:  Ohh! Nice! How'd you pull that off?

The IRIX install file's in Nekoware Beta.

I downloaded the Hexen II demo and installed it in SoftWindows95 and then copied the installed folder over to IRIX.

I then copied the Hexen II folder into the games folder in nekoware and then copied the h2launcher and GLhexen2 files from the bin folder into the hexen II folder in games.

You need to run GLhexen2 first, which doesn't work and then only can you use the h2launther to launch the game, this is a necessary step.

Thanks to eudatux23, I now have the full version with expansions up and running!

can you tar that up and post it ? Smile
I will upload a tar containing everything this evening Smile

Here you can get the datafiles:
http://fr.irisware.net/irix-software/games/hexen2_datafiles.tar.xz

You need to unpack that archive to ~/.hexen2

After that, please make sure that the files ending with .PAK in the data1 subfolder get lowercase names.

Now you can launch it with:
glhexen2 -width 1024 -height 768

No need to mess with launchers

Just forgot the tardist, here it is:
http://fr.irisware.net/nekoware/beta/neko_uhexen2-1.5.4.tardist


RE: Hexen II up and running natively in IRIX! - Irinikus - 04-14-2019




RE: Hexen II up and running natively in IRIX! - gijoe77 - 04-14-2019

thanks Irinikus/eudatux23

awesome, gonna try to get this working on my o2 - will report back


RE: Hexen II up and running natively in IRIX! - Irinikus - 04-14-2019

(04-14-2019, 12:20 PM)gijoe77 Wrote:  thanks Irinikus/eudatux23
awesome, gonna try to get this working on my o2 - will report back

I think it should run well on your O2!


RE: Hexen II up and running natively in IRIX! - gijoe77 - 04-14-2019

I'm having a bit of an issue - when I go to start a new game it hangs, here is the output


Code:
bash-4.3$ glhexen2 -width 800 -height 600
Hammer of Thyrion, release 1.5.4 (2012-07-01)
running on Hexen2 engine 1.26 (Irix)
More info / sending bug reports:  http://uhexen2.sourceforge.net
basedir is: /usr/people/games/hexen2
userdir is: /usr/people/games/.hexen2
Detected byte order: BE
Found SDL version 1.2.14
Host_Init
Server using protocol 19 (Raven/MP/1.12)
Added packfile /usr/people/games/hexen2/data1/pak0.pak (696 files)
Added packfile /usr/people/games/hexen2/data1/pak1.pak (523 files)
Added packfile /usr/people/games/hexen2/data1/pak5.pak (10 files)
Added packfile /usr/people/games/hexen2/data1/pak6.pak (16 files)
Playing registered version.
UDP, Local address: 192.168.1.107
UDP Initialized
Exe: 20:28:04 Jul 29 2012
32.0 megabyte heap
Console initialized.
Using system GL library
WARNING: 640x480 not found in fullscreen modes
Using the largest reported dimension as default
Requested mode 1: 800x600x16
Video Mode Set : 800x600x24
vid_info: red: 8, green: 8, blue: 8, alpha: 0, depth: 24
GL_VENDOR: SGI
GL_RENDERER: CRIME
GL_VERSION: 1.1 Irix 6.5
OpenGL max.texture size: 1024
GL_ARB_multitexture not found
Anisotropic filtering not found
Stencil buffer created with 8 bits
gamma not available, using gl tricks
Video initialized.

Sound Initialization
SDL audio spec  : 22050 Hz, 512 samples, 2 channels
SDL audio driver: AL, 32768 bytes buffer
Audio: 16 bit, stereo, 22050 Hz, using SDLAudio
Could not initialize Timidity
Couldn't init SDL cdrom: SDL not built with cdrom support
MIDI_DRV: disabled at compile time.
No joystick devices found

======== Hexen II Initialized =========

execing hexen.rc
execing default.cfg
execing config.cfg
couldn't exec autoexec.cfg

have you guys run into this?

edit: nvm - the game works - it was just taking FOREVER to load on the o2. I kept killing it because it was taking too long Smile