Running power-on diagnostics... Starting up the system... To perform system maintenance instead, press System Maintenance Menu 1) Start System 2) Install System Software 3) Run Diagnostics 4) Recover System 5) Enter Command Monitor Option? 5 Command Monitor. Type "exit" to return to the menu. >> printenv AutoLoad=Yes TimeZone=PST8PDT console=d1 diskless=0 dbaud=9600 volume=80 sgilogo=y autopower=y netaddr=10.9.8.31 eaddr=08:00:69:0b:63:59 ConsoleOut=serial(0) ConsoleIn=serial(0) cpufreq=180 SystemPartition=scsi(0)disk(1)rdisk(0)partition(8) OSLoadPartition=scsi(0)disk(1)rdisk(0)partition(0) OSLoadFilename=/unix OSLoader=sash >> hinv System: IP22 Processor: 180 Mhz R5000, with FPU Primary I-cache size: 32 Kbytes Primary D-cache size: 32 Kbytes Secondary cache size: 512 Kbytes Memory size: 256 Mbytes SCSI Disk: scsi(0)disk(1) >> bootp():i/22/ovl1/stand/fx.ARCS -x Setting $netaddr to 10.9.8.31 (from server 10.9.8.54) Obtaining i/22/ovl1/stand/fx.ARCS from server 10.9.8.54 95040+26448+7168+2805248+50056d+5908+8928 entry: 0x97d4aa40 SGI Version 6.5 ARCS BE Oct 6, 2003 fx: "device-name" = (dksc) fx: ctlr# = (0) fx: drive# = (1) ...opening dksc(0,1,0) ...drive selftest...OK Scsi drive type == codesrc SCSI2SD 6.0 ----- please choose one (? for help, .. to quit this menu)----- [exi]t [d]ebug/ [l]abel/ [a]uto [b]adblock/ [exe]rcise/ [r]epartition/ fx> r ----- partitions----- part type blocks Megabytes (base+size) 0: xfs 266240 + 29093888 130 + 14206 1: raw 4096 + 262144 2 + 128 8: volhdr 0 + 4096 0 + 2 10: volume 0 + 29360128 0 + 14336 capacity is 29360128 blocks ----- please choose one (? for help, .. to quit this menu)----- [ro]otdrive [o]ptiondrive [e]xpert [u]srrootdrive [re]size fx/repartition> ro fx/repartition/rootdrive: type of data partition = (xfs) Warning: you will need to re-install all software and restore user data from backups after changing the partition layout. Changing partitions will cause all data on the drive to be lost. Be sure you have the drive backed up if it contains any user data. Continue? yes ----- partitions----- part type blocks Megabytes (base+size) 0: xfs 266240 + 29093888 130 + 14206 1: raw 4096 + 262144 2 + 128 8: volhdr 0 + 4096 0 + 2 10: volume 0 + 29360128 0 + 14336 capacity is 29360128 blocks ----- please choose one (? for help, .. to quit this menu)----- [ro]otdrive [o]ptiondrive [e]xpert [u]srrootdrive [re]size fx/repartition> .. ----- please choose one (? for help, .. to quit this menu)----- [exi]t [d]ebug/ [l]abel/ [a]uto [b]adblock/ [exe]rcise/ [r]epartition/ fx> l ----- please choose one (? for help, .. to quit this menu)----- [sh]ow/ [sy]nc [se]t/ [c]reate/ fx/label> sy writing label info to dksc(0,1,0) ----- please choose one (? for help, .. to quit this menu)----- [sh]ow/ [sy]nc [se]t/ [c]reate/ fx/label> .. ----- please choose one (? for help, .. to quit this menu)----- [exi]t [d]ebug/ [l]abel/ [a]uto [b]adblock/ [exe]rcise/ [r]epartition/ fx> /exi System Maintenance Menu 1) Start System 2) Install System Software 3) Run Diagnostics 4) Recover System 5) Enter Command Monitor Option? 5 Command Monitor. Type "exit" to return to the menu. >> bootp():i/22/ovl1/dist/miniroot/unix.IP22 Setting $netaddr to 10.9.8.31 (from server 10.9.8.54) Obtaining i/22/ovl1/dist/miniroot/unix.IP22 from server 10.9.8.54 Setting $netaddr to 10.9.8.31 (from server 10.9.8.54) Obtaining i/22/ovl1/dist/miniroot/unix.IP22 from server 10.9.8.54 IRIX Release 6.5 IP22 Version 10070055 System V Copyright 1987-2003 Silicon Graphics, Inc. All Rights Reserved. WD95A SCSI controller 4 - differential external, rev 0, min xfer period 100ns WD95A SCSI controller 5 - differential external, rev 0, min xfer period 100ns gfe1: missing gfe0: missing xpi0: missing from slot 1 WARNING: Kernname environment variable not set by sash. Runtime symbol table not loaded. Loadable modules will not be registered or loaded. WARNING: initial mount of root device /hw/node/io/gio/hpc/scsi_ctlr/0/target/1/lun/0/disk/partition/1/block failed with errno 1011 PANIC: vfs_mountroot: no root found [Press reset to restart the machine.]