/usr/diags/IR/bin/irsaudit -rm REV Rev:3.3.2 Mon Oct 6 21:14:39 PDT 2003 sherwood on splat CMDL /usr/diags/IR/bin/irsaudit -rm TEST reset Reset RSLT reset PASS TEST sysprobe JTAG System Probe TRCE GE12 board has 4 GE11s. INFO GE board is a GE12. TRCE BEF has 4MB of memory. TRCE GPI cable for Sirius video option not present (ok). TRCE RM #0 is fully populated RM6. TRCE RM #0 has 64MB (1Mx16 parts) of texture memory. TRCE RM #1 is fully populated RM6. TRCE RM #1 has 64MB (1Mx16 parts) of texture memory. TRCE RM #2 not detected via JTAG. TRCE RM #3 not detected via JTAG. TRCE DG has 8 VOC configuration. TRCE No DG option board claimed by board ID. TRCE DG has 32K colormap RAMs. TRCE DG has 64K external gamma/deep colormap RAM. TRCE PAB2 or DVP option not detected. RSLT sysprobe PASS TEST nicprobe NIC Board Probe TRCE Reading ARM ucode from: /usr/diags/IR/ucode/arm1_nic.u TRCE GE NIC #: 0000.0018.8473 (family: 0b) TRCE Serial #: GGJ232 TRCE Part #: 030-0681-003 TRCE rev_code: D TRCE name: GE12-4 NIC# PNGE-030-0681-003 SN-GGJ232 (0000.0018.8473) TRCE RM0 NIC #: 0000.000e.a707 (family: 0b) TRCE Serial #: FDS273 TRCE Part #: 030-0684-004 TRCE rev_code: F TRCE name: RM6-64 NIC# PNRM-030-0684-004 SN-FDS273 (0000.000e.a707) TRCE RM1 NIC #: 0000.000a.4cf8 (family: 0b) TRCE Serial #: CLX422 TRCE Part #: 030-0684-004 TRCE rev_code: F TRCE name: RM6-64 NIC# PNRM-030-0684-004 SN-CLX422 (0000.000a.4cf8) TRCE DG NIC #: 0000.0014.17df (family: 0b) TRCE Serial #: EAA991 TRCE Part #: 030-0687-004 TRCE rev_code: E TRCE name: DG4-8 NIC# PNDG-030-0687-004 SN-EAA991 (0000.0014.17df) RSLT nicprobe PASS TEST rmconn RM boundary scan TRCE Testing RM #0 for stucks. TRCE Testing RM #0 for shorts. TRCE Testing RM #1 for stucks. TRCE Testing RM #1 for shorts. RSLT rmconn PASS TEST fpconn DG-RM Frontplane Boundary Scan TRCE Testing for stucks on RM #0. TRCE Testing for shorts on RM #0. TRCE Testing for stucks on RM #1. TRCE Testing for shorts on RM #1. RSLT fpconn PASS TEST rm_intbist RM Board Internal BIST TRCE Run internal BIST on RM #0 ASICs TRCE Run internal BIST on RM #1 ASICs RSLT rm_intbist PASS TEST rm_extbist RM Board External BIST TRCE Run external BIST on RM #0 ASICs TRCE Run external BIST on RM #1 ASICs RSLT rm_extbist PASS TEST geducode Download GED Microcode TRCE Loading /usr/gfx/ucode/KONA/ged1b.u RSLT geducode PASS TEST geucode Download GE11 Microcode ++FRU ANALYSIS BEGIN ++ ++ ++ FRU Analysis Summary ++ ++ ONE OF THE IO ADAPTERS ++ on the IO4 board in slot 9: 40% confidence. ++ ONE OF THE IO ADAPTERS ++ on the IO4 board in slot 11: 40% confidence. ++ ++FRU ANALYSIS END HARDWARE ERROR STATE: + IP25 in slot 5 + CC in Cpu Slot 5, cpu 1 + CC ERTOIP Register: 0x40 + 6:A Chip MyResponse D-Resource time out + IO4 board in slot 9 + IA EBUS Error Register: 0x100 + 8: Read Resource Time Out + IO4 board in slot 11 + IA EBUS Error Register: 0x100 + 8: Read Resource Time Out PANIC: CPU 1: Hardware error detected, arg=0x0 Dumping to /hw/scsi_ctlr/1/target/1/lun/0/disk/partition/1/block at block 0, space: 0x2000 pages Dumping low memory... Dumping static kernel pages...... Dumping backtrace pages... Dumping dynamic kernel pages...... Dumping buffer pages..... Dumping remaining in-use pages.......................................... Dumping free pages................................................................................... Available dump space depleted. Reboot started from CPU 1 CPU 1 rebooting CPU 0